How to Make Ram Tow Mirror Lights Stay on: Ultimate Guide

Wondering how to make your Ram tow mirror lights stay on? The process is simple and can improve your driving experience.

Ram tow mirror lights are a great feature for better visibility. But sometimes, they turn off when you don’t want them to. This can be annoying, especially during night drives or when towing. Thankfully, you can make these lights stay on with a few steps.

In this guide, we will show you how to ensure your Ram tow mirror lights remain on whenever you need them. This will help you drive safely and confidently. So, let’s dive into the steps you need to take to keep your mirror lights on.

Credit: www.cumminsforum.com

Tools And Materials Needed

You will need a set of basic tools. A screwdriver and pliers are must-haves. A multimeter is helpful to check connections. Don’t forget wire cutters and electrical tape.

Wiring kit is essential. This includes wires and connectors. LED lights are needed for the mirrors. Have zip ties to secure wires. Heat shrink tubing helps protect connections. Fuses are important for safety.

Safety Precautions

Ensure your vehicle is off and parked safely before working on the tow mirror lights. Disconnect the battery to avoid electrical hazards. Use proper tools and follow the manual instructions carefully.

Protective Gear

Always wear safety gloves. Protect your hands from sharp edges. Use safety goggles. Keep your eyes safe from debris. A face mask is also important. Avoid inhaling dust or fumes. These items are essential for your safety.

Work Area Preparation

Clear the work area of any clutter. Ensure you have good lighting. This helps you see what you are doing. Organize your tools. Keep them within reach. Make sure there is enough space to move around. A clean and organized area prevents accidents. It also helps you work efficiently.

Removing The Tow Mirror

First, find the battery in your truck. Use a wrench to loosen the negative cable. Remove the cable from the battery terminal. This step is very important. It will help keep you safe.

Locate the screws holding the mirror. Use a screwdriver to remove these screws. Be sure to hold the mirror steady. Otherwise, it might fall. After the screws are out, gently pull the mirror away. There may be wires connected to the mirror. Unplug these wires carefully.

Accessing The Wiring

First, locate the screws on the mirror cover. Use a screwdriver to remove them. Be gentle to avoid damaging the cover. Once the screws are out, gently pry the cover off. You might need a plastic tool for this. Place the cover aside carefully. This exposes the wiring inside the mirror.

Look for the main wire harness. It will have several wires. Each wire has a different color. These colors help identify their function. Find the wire connected to the lights. It is usually marked or labeled. Double-check to ensure you have the right wire. This step is crucial for the lights to stay on.

Modifying The Wiring

First, gather all needed tools. You will need wire cutters, connectors, and electrical tape. Cut the wire you want to splice. Strip the ends of both wires. Twist the exposed ends together. Use a wire connector to secure them. Wrap the connection with electrical tape. Ensure no metal is visible. This will prevent shorts. Check your work. Make sure the connection is tight.

Find a power source. It should be a constant power source. Connect the power wire to this source. Use a fuse holder for safety. Connect the ground wire to a metal part of the car. Use a bolt or screw. Secure the ground wire well. This ensures a stable connection. Test the lights. They should stay on now.

Testing The Lights

First, ensure the battery is reconnected properly. This step is crucial. A loose connection can cause issues. Check both the positive and negative terminals. Make sure they are tight. Once done, you can move on.

Turn on your truck. Check if the tow mirror lights stay on. If they don’t, inspect the wiring again. Look for any loose or damaged wires. Sometimes, a simple fix can solve big problems. If the lights work, you are ready to go.

Reassembling The Mirror

First, align the mirror cover with the main mirror body. Make sure it fits perfectly. Gently press the cover into place. You should hear a click when it locks. This means it is secure. Check the edges. They should sit flush against the mirror. There should be no gaps. If there are gaps, adjust the cover. Press again until it clicks.

Hold the mirror firmly. Align it with the base. Slide it into the mounting bracket. Push until you hear a click. This means it is attached. Check the mirror. It should move smoothly. If it is loose, press harder. Ensure it is tight and secure. Test the mirror lights. They should stay on. If they flicker, check the connections.

Credit: www.cumminsforum.com

Final Checks

First, turn on the truck lights. Check if the mirror lights are on. Ensure all connections are secure. Loose wires can cause issues. Test both mirrors. They should light up simultaneously. If one side is off, recheck the connections. Sometimes, a fuse might be blown. Replace it if necessary. Ensure the switch is working properly. A faulty switch can cause problems. Use a voltmeter to check the current. Proper operation is key.

Lights not turning on? Check the fuses first. A blown fuse is a common issue. Replace it if needed. Loose connections can also be a problem. Make sure all wires are tight. If lights flicker, check the battery. It might be low. Sometimes, the switch may be faulty. Replace it if necessary. Ensure the ground wire is properly connected. Poor grounding can cause issues. Always double-check your work.

Credit: www.youtube.com

Frequently Asked Questions

How To Keep Ram Tow Mirror Lights On?

To keep your Ram tow mirror lights on, you need to modify the wiring. Ensure you follow the vehicle’s electrical system guidelines. This may require professional assistance for safety.

Can I Make Tow Mirror Lights Stay On All The Time?

Yes, you can make tow mirror lights stay on all the time. Adjust the wiring to connect them to a constant power source.

Do I Need A Professional To Modify Tow Mirror Lights?

It’s recommended to hire a professional to modify tow mirror lights. This ensures safety and prevents damage to the vehicle’s electrical system.

Will Modifying Tow Mirror Lights Affect My Warranty?

Modifying tow mirror lights might affect your vehicle warranty. Check with your dealer or manufacturer before making any changes.

Conclusion

Keeping your Ram tow mirror lights on is easier than you think. Follow the steps we shared, and you’ll have a consistent light. Always check connections and replace faulty parts. Regular maintenance ensures longevity. Happy towing with your well-lit Ram!